/ Servo Energy Saving Injection Molding Machine
KWS Series:KW100S~KW180S
Product Information

Servo energy saving injection molding machine output power changes corresponding the loading changing. There’s no extra waste of power. The motor decreases rotation speed which result in low consumption during pressure hold period. Also the motor doesn’t work while cooling, electricity consumption is 0. According to different products, in comparison with the tradition injection molding machine, the servo machine can save electricity 20%-80% that brings you excellent profit.

【 Features 】

‧ 1. Excellent energy saving: As compared with the traditional fixed pump injection molding machine, it saves energy 20%-80% under the same working condition.

‧ 2. Excellent injection molding stability: The pressure and flow of servo drive system applies closed-loop control, as compared with the traditional injection molding machine, it greatly increases repeatability precision of injection molding.

‧ 3. Fast response: Fast response servo drive, the start time faster than that of the traditional injection molding machine by 50%.提高50%

‧ 4. Environmental friendly: The complete machine runs under low noisy, low speed operation and quite.

‧ 5. Constant oil temperature: The servo motor output hydraulic oil according to proportion to avoid extra heat. Even the hydraulic oil need not to be cooled to realize excellent water saving.

Product Display



Technical Parameters
Screw diameter / mm3538353840384245384042424548455055
Shot Volume theoretical / cm³154181154181201187228262244270298353405461334412499
Injection Weight / g138160139163181160200235220240265315364415301372449
Injection rate / g/s7578891051218086110108125130108125130120148179
Injection pressure / Mpa149126170144130183150130176158143177155136181147121
Screw rotation speed / rpm190200185200185180

Clamping force / KN100011801280138016601800
Open stroke / mm290345345370420440
Space between tie bars-W×H / mm355×315370×370415×375425×405460×460480×460
Max.Mould height / mm350380400460500500
Min.Mould height / mm150150150170180200
Ejector stroke / mm70100100120120100
Ejector force / KN273333333970

Max.Pump pressure / Mpa141414141414
Pump motor power / KW9.51111131518.5
Heating power / KW6.
Machine dimension -L×W×H / m3.5×1.25×1.74.2×1.20×1.84.3×1.25×1.74.9×1.25×1.854.8×1.45×1.94.8×1.4×1.9
Machine weight / t2.
Mould Platen Dimensions
Mould Space Dimensions
Client Messages

CopyRight 2016 宁波劲威机械有限公司 All Right Reserved       技术支持:一诺优品 · 量身定制